Product beschrijving

The BEPMARINE 722-KS switch panel is ideal for applications where a key switch is required. Delivered ready for operation and equipped with an ON / OFF switch and an LED operation indicator.

The switch panel can be used immediately as a replacement part for the following BEPMARINE products: 701-MD, 720-MD and 722, since the LED operating display is pre-wired. For these products, the NEG line of a circuit is switched on. That is, the switch contacts BAT and IGN are located in the NEG line. To do this, the red wire for the LED operating display must be connected to a POS 12 V source.

For other applications, the key switch can, of course, also be operated with its contacts BAT and IGN in the POS line of a circuit! For this purpose, the LED operation display can be easily switched around. The wire must then be connected NEG 12 Volt.

  • Scope of delivery: Key switch with 12 volt LED operation indicator on plastic panel, 2 keys
  • Panel dimensions (LxWxD): 70 x 70 x 76 mm
  • Mounting: 4 holes of 6 mm (1/4 "), hole spacing 54 mm
  • Required mounting hole: Ø 38 mm
  • Switch connections: Screw mounting for 4 mm ring cable shoes
  • LED connector: Plug
  • LED operating voltage: 12 volts
  • LED current consumption: Approx. 15 mA @ 12 V
  • Maximum load capacity: BEPMARINE does not provide any details.

Not suitable for outdoor use.

By using an additional 680 - 820 Ohm / 1 W resistor in the LED connection cable, the switch panel can also be used in 24 V systems.

For LED polarity reversal, please remove the heatsink adhesive, which fixes the white plug's housing to the control panel, pull the plug, turn 180°, re-attach and fix with glue.


de-flag Korte handleiding
PDF, 382,72 KB

What other SVB customers say

100% genuine reviews
Er zijn nog geen beoordelingen

Customers ask customers

Ask other SVB customers who have already purchased this product from us for your experience.

Your question will be automatically forwarded to other SVB customers and your question will be published on the product page. Please do not pose any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: or by phone at: +49 (0)421-57290-0 .

Technische vraag

User image of Bert D.
Bert D. asked
on 22 nov. 2018
National flag of Nederlands 1. Is this switch to be used as a normal on/off switch, that means is it a constant ON and OFF condition, or is it a momentary ON puls ? 2. Is OFF= NO (normaly open), and ON= NC (normally closed) contact ? 3. Can the key be removed in both positions : ON and OFF ?
No answers yet. Be the first to answer this question!