Art.nr.
20106
EAN
00632085077013
Model nr.
7701
Omschrijving
HD Univeral Solenoid Switch 12V
Operating voltage
12 V
Connector pins
M10
Product beschrijving
This bistable switching relay can be installed close to the consumer and only a thin control cable is required to connect the remote control switch. These relays are designed for high loads, i.e.. a continuous load of 500 A, a peak load of 700 A (max 5 min.) and a starting load of 2500 A (max 10 s) are no problem.
The relay draws power only during the switching operation (100 mA ). In position OFF or ON, the relay consumes no power.
The ON-OFF-ON remote control switch is included. A safety mechanism integrated in the remote control housing prevents unintentional switching on or off and at the same time displays the current operating status (ON or OFF key). The remote can be lit up by 2 integrated red LEDs (control panel lighting). If wired according to the manufacturer's specifications, the LED current consumption is 30 to 40 mA continuously.
Our tip: only put remote pin-2 (over a 2 A fuse) to battery PLUS. Remote pin-8 (LED-PLUS) connect (over a 2 A fuse) to relay-contact B (battery PLUS). The LED-function control shows if your on-board power is turned on.
The relay draws power only during the switching operation (100 mA ). In position OFF or ON, the relay consumes no power.
The ON-OFF-ON remote control switch is included. A safety mechanism integrated in the remote control housing prevents unintentional switching on or off and at the same time displays the current operating status (ON or OFF key). The remote can be lit up by 2 integrated red LEDs (control panel lighting). If wired according to the manufacturer's specifications, the LED current consumption is 30 to 40 mA continuously.
Our tip: only put remote pin-2 (over a 2 A fuse) to battery PLUS. Remote pin-8 (LED-PLUS) connect (over a 2 A fuse) to relay-contact B (battery PLUS). The LED-function control shows if your on-board power is turned on.
Technical specifications:
- DC circuit voltage for relay control:
12 volt version = 10.1V - 16.5V - DC power capacity:
- 2500 A for 10 seconds
- 700 A for 5 minutes
- 500 A constantly
- Remote control:
CARLING ON-OFF-ON (1-polar with 2x LED red),
Required assembly opening for remote: 36 mm x 21 mm (1.45 "x 0.83") - Connections:
- Relay = 2x threaded bolt 10mm bolt (3/8 "-16), tightening torque 15,8 Nm (140 in-lb),
5 different colour control panel wiring with tinned cable endings,
Remote control button = 5x 6.3 mm flat plugs
- Relay = 2x threaded bolt 10mm bolt (3/8 "-16), tightening torque 15,8 Nm (140 in-lb),
- Dimensions: 139 x 95 x 51.5 mm.
- Weight: 0.79 kg (1.75 lb)
Documenten
PDF, 26,68 KB
PDF, 547,17 KB
Klanten kopen ook

Sanitation Hose with Barrier Layer
van 25
37
€

BLUE SEA
HD Remote Battery Switch / 12V
enkel 289
74
€

TIKAL
TIKALFLEX Contact 12 Adhesive / Sealant
van 7
63
€

EPIFANES
One-Component Hardwood Oil Varnish
enkel 43
67
€
€ 48,28
-10%

ATLAS
Drinking Water Filter Inserts SX, wrapped with Granular Activated Carbon
van 12
15
€

JABSCO
Spare Parts Kit for Hand Pump (starting YoM 2007)
enkel 57
91
€

GLEISTEIN
DOCK-TWIN Mooring Line / navy blue
van 2
85
€
Vergelijkbare producten

MASTERVOLT
MLI Ultra Connection Kit / 12V
enkel 366
00
€
€ 400,03
-9%

BLUE SEA
Universal Solenoid Switch / 24 V
enkel 274
49
€

BLUE SEA
HD Automatic Charging Relay 500 A / 24V
enkel 335
50
€

BLUE SEA
HD Remote Battery Switch / 24V
enkel 289
74
€

BLUE SEA
HD Remote Battery Switch / 12V
enkel 289
74
€

BLUE SEA
HD Automatic Charging Relay 500 A / 12V
enkel 355
83
€
Customers ask customers
Ask other SVB customers who have already purchased this product from us for your experience.
Your question will be automatically forwarded to other SVB customers and your question will be published on the product page. Please do not pose any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: info@svb24.com or by phone at: +49 (0)421-57290-0 .
No questions asked yet. Be the first to ask a question!