VHF-Radio - Wat je moet weten voordat je een radio koopt

VHF-Radio – What you need to know before buying a radio

A VHF radio is still an essential part of any sailor's life today, even though mobile phone reception in coastal areas is improving all the time thanks to better network coverage. Find out why you need a marine radio on board and which additional functions come in handy.

Discover radios now »

What is a VHF radio?

VHF stands for Very High Frequency and is part of the marine mobile radio service. VHF radios are can be installed on your boat or are available as handheld radios. Very high frequency waves are transmitted and received via an antenna on board. Range depends on the height of the antenna, and if an antenna is mounted high enough, a VHF radio can reach a range of up to approx. 30 nautical miles (56 km). The range for DSC is about twice this. With a VHF marine radio, it is possible for two ships to communicate with each other or for a ship to communicate with coastal radio stations.

Why do I need a marine radio on board?

In most cases, a marine radio is used for everyday things on board, such as communicating with other boats, listening to weather forecasts, asking for a bridge to be opened or permission to enter a lock, as well as contacting ports and coastal radio stations. In the event of technical problems or if a marine emergency occurs, a radio can be a lifesaver and provides safety on board. A marine radio is much more reliable than a mobile phone, which has limited range on the water and with which calls often break off.

 marine radio on board

How does a VHF radio work?

Unlike single-sideband radios and shortwave radios, VHF radios receive and transmit line of sight (LOS) signals. This means that due to the way these radio waves travel, mountains and land masses that restrict visibility can also block VHF radio signals. VHF radios only 'hear' the strongest signal they receive. If several boats are transmitting on the same frequency at the same time, only the radio message with the strongest signal is sent. Installed VHF radios are powered by the boat battery and usually have low power consumption. This means, however, that if your battery is discharged, your VHF radio will no longer work. In this case a handheld radio is good to have as back up.

Marine radio basics - summary

  • Marine radios have a range of up to 30 nautical miles (56 km), depending on the height of the antenna. DSC has about twice the range.
  • Marine radios allow you to communicate with other boats, listen to weather forecasts and communicate with coastal radio stations. In the event of an emergency at sea, help can be notified using a marine radio.
  • Even inexpensive marine radios are good quality. The standard Horizon GX2200E is by far our most popular radio.

What licence do I need for my radio - VHF radio certificates SRC and UBI

In order to be able to operate marine radio equipment without difficulty and to be able to send a call for help quickly in an emergency at sea, the skipper must have a valid VHF radio licence. A VHF radio certificate must be held regardless of whether the radio is switched on or off. In Germany, anyone over the age of 15 can get a VHF radio certificate, obtainable by taking a theoretical and practical exam. Depending on the sailing area, different radio certificates are required:

VHF radio certificates

SRC marine radio

The SRC radio certificate (Short Range Certificate) entitles the holder to operate a VHF radio system with DSC controller on a recreational craft or sailing yacht in international waters. The SRC is valid for an unlimited period and is also required by many charter companies in the Mediterranean.

UBI inland radio

In inland navigation in Germany (on rivers and lakes), if a VHF radio system is present on board, a UBI radiotelephone certificate for inland radio must be held. UBI certificates are valid for both professional and recreational navigation.

VHF radio certificates - summary

  • A VHF certificate must be held regardless of whether the radio on board is switched on or off and can be obtained from the age of 15.
  • SRC radio certificate: to operate a VHF radio system with DSC controller
  • UBI radio certificate: for inland radio in professional and recreational navigation
Radio channel groups

Radio channel groups

Radios have different channel groups, depending on their specifications. When buying, you should pay attention to the purpose for which your preferred radio is intended and which functions and channel groups you need on board. Some functions and menu items, such as DSC call, are only available in the respective channel groups.

The channel group your VHF marine radio is currently set to is usually shown on the main screen of the display. The channel group can be changed by pressing a button or via the menu, depending on the model.

A distinction is made between the following channel groups and functions:

1. VHF-Channel group "INT"

INT stands for International. This channel group is used outside inland waters. The radio can transmit with a power of up to 25W, depending on the channel.

2. Channel group "DSC"

DSC stands for Digital Selective Call. This is a special calling procedure in marine radio, which can be used as an alternative to voice radio calling through public channels. Most current marine radios have a built-in DSC controller. DSC is part of the international GMDSS protocol for safety measures (Global Maritime Distress Safety System). To use DSC on your marine radio, you need an SRC radio certificate and a DSC number, also called an MMSI (Maritime Mobile Service Identity) number. An MMSI number can be applied for online. The VHF radio can then be programmed with the number either by your dealer or by yourself. DSC radio should be part of the standard equipment on board, especially on yachts sailing at sea.

Once you are in the DSC channel group, you can make a distress call using the Distress button on your radio. The distress call will contain details of the type of emergency and your personal MMSI number. If a GPS receiver is connected to your VHF radio (modern radios have a built-in GPS antenna) your current position is also transmitted. If no GPS receiver is connected, you can enter your position data manually. This can be particularly inconvenient in a stressful situation, so it is therefore advisable to connect a GPS receiver.

Furthermore, you can use the DSC call by entering the MMSI number to establish a direct radio link to one or more radio stations, i.e., to another vessel or vessels in the vicinity. It is also possible to establish a connection to all receivable radio stations in the vicinity with a so-called "All Ships/Stations Call".

If you are sailing with several other vessels, DSC group calling is a good way to stay in touch. The DSC group call feature allows you to call a pre-selected group of MMSI numbers or vessels via DSC. This is particularly useful during a race or when sailing in a fleet. When an alarm is received, the units automatically switch to the active channel.


Before making a DSC call, you must define a radio channel that you wish to use for voice communication. When the DSC call is accepted by the other party, the channel is automatically changed to the previously defined radio channel.

TIP: To keep your details readily available, affix your personal MMSI and call sign to the radio so that they are clearly visible.

“ATIS” channel group

ATIS stands for Automatic Transmitter Identification System. An ATIS radio or ATIS channel group is used for radios on inland waterways. For inland ATIS radio, possession of a UBI VHF radiotelephone certificate is mandatory. The radio must also be programmed with your personal ATIS number. The ATIS number can be obtained in the same way as the MMSI number from an online portal (country dependent). The ATIS number is transmitted with every radio message sent and is used by the authorities to identify the radio station that is calling. In order not to interfere with surrounding radio traffic, transmission power of radio equipment is limited to 1W in the ATIS channel group.

VHF marine radio channels & frequencies

Every VHF channel group has its own channel table. This table determines the assignment of transmitting and receiving frequencies for the respective channels. In general, a distinction is made between duplex and simplex channels. A duplex channel has different transmitting and receiving frequencies and is used for communication between ships and coastal radio stations, while a simplex channel transmits and receives on the same frequency. Simplex channels are used for communication between vessels.

K Send Reception K Send Reception K Send Reception K Send Reception K Send Reception K Send Reception
01 156,050 160,650 11 156,550 156,550 21 157,050 161,650 62 156,152 160,725 72 156,625 156,625 82 157,125 161,725
02 156,100 160,700 12 156,600 156,600 22 157,100 161,700 63 156,175 160,775 73 156,675 156,675 83 157,175 161,775
03 156,150 160,750 13 156,650 156,650 23 157,150 161,750 64 156,225 160,825 74 156,725 156,725 84 157,225 161,825
04 156,200 160,800 14 156,700 156,700 24 157,200 161,800 65 156,275 160,875 75 156,775 156,775 85 157,275 161,875
05 156,250 160,850 15 156,750 156,750 25 157,250 161,850 66 156,325 160,925 76 156,825 156,825 86 157,325 161,925
06 156,300 156,300 16 156,800 156,800 26 157,300 161,900 67 156,375 156,375 77 156,875 156,875 87 157,375 157,375
07 156,350 160,950 17 156,850 156,850 27 157,350 161,950 68 156,425 156,425 78 156,925 161,525 88 157,425 157,425
08 156,400 156,400 18 156,900 161,500 28 157,400 162,000 69 156,475 156,475 79 156,975 161,575
09 156,450 156,450 19 156,950 161,550 60 156,025 160,625 70 156,525 156,525 80 157,025 161,625
10 156,500 156,500 20 157,000 161,600 61 156,075 160,675 71 156,575 156,575 81 157,075 161,675

Frequency in MHz, only with performance "low" (Low Power), only receipt

VHF Radio Channel Groups & Frequencies - Summary

  • INT Channel group: outside inland waters. Transmitting power of up to 25 W.
  • DSC channel group:DSC channel group: In addition to the INT channel group, Digital Selective Call offers the possibility of making an emergency call (Distress-Call) or to specific radio stations. An MMSI number is required for use.
  • ATIS channel group: used for radios on inland waterways. An ATIS number is required.
  • Each channel group has its own channel table showing the transmitting and receiving frequencies.

What additional features should my VHF radio have?

Marine radios with GPS receiver

A GPS receiver for a VHF radio is highly recommended when using the DSC function. This is because DSC technology is based on a current position. If an emergency occurs at sea and you need to make a DSC distress call quickly, entering the GPS position is mandatory. In such stressful circumstances, being able to take advantage of the GPS receiver's automatic position locating is much faster and more reliable than entering this manually on the radio.

Since autumn 2018, it has been mandatory for radio manufacturers to include an internal GPS receiver in their new radios. This is intended to make radio equipment independent of other electronic devices on board. But GPS reception below deck is not always flawless. On steel boats the GPS receiver can be blocked, and metal/wood or multi-layer fibreglass structures can also adversely affect GPS reception. In this case, depending on the supported interface of the radio, it is possible to input GPS data from external sources using NMEA0183 or NMEA2000.

A selection of external GPS antennas can be found here.

Marine radios with AIS

Some marine radios have a built-in AIS receiver. If you want to use AIS on board for faster and easier identification of your vessel and increased safety, a radio with an AIS receiver saves you from having to install a second VHF antenna. The splitter installed in the radio allows AIS data to be received through the radio antenna.

Some radios have an integrated AIS transmitter in addition to theAIS receiver. However, some radios require an extra VHF antenna to be installed.

You can find out more about AIS in our AIS guide..

Marine radio interfaces

For data input or output, such as current GPS position or AIS data, an NMEA0183 interface and/or the more modern NMEA2000 interface is used, depending on the radio. This interface allows you to exchange data between compatible devices. You can, for example, transfer GPS position data from your chartplotter to the radio device and transfer AIS data received from the radio (with an integrated AIS receiver) to the chartplotter.

For more important information regarding NMEA interfaces, see our NMEA Guide..

Additional control units for marine radios

To be able to access your VHF marine radio from different places on board, such as below deck or at the helm, you can choose a radio that allows you to install one or more additional control units, making radio communication easier. Depending on the model, a second control unit can be connected either by cable or wirelessly. However, wireless connection is not recommended on steel boats because signals can be blocked. An additional control unit on board is a good alternative to a portable radio, as it shares the power supply and VHF antenna of an installed radio, resulting in good range.

Additional features of marine radios - summary

  • Radios with integrated GPS receivers are useful when using DSC. In an emergency, the position of your boat can be determined directly.
  • Radios with AIS receivers make the installation of a second VHF antenna unnecessary. Radios with integrated AIS transmitters are also available.
  • When choosing a VHF radio, look for an NMEA0183 or NMEA2000 interface.
  • Additional control units allow radio transmission from several points on board.
Written by our SVB (technical) experts

Written by our SVB (technical) experts

Our team of SVB technical experts is there to give our customers professional advice on all matters relating to technology on board. With specialist know-how, extensive training, and a technical flair for electrical connections, fittings etc, our crew are more than qualified to advise our customers.