For coated surfaces:
Degrease surface with Thinner No. 1 and sand with 280-320 grit, clean and allow to dry.
For uncoated surfaces:
- Bare wood: Sand first with 80-180 grit then with 280 grit and remove dust. Then apply wood treatment and allow to dry.
- Oily woods: Thoroughly degrease with Thinner No. 1. Allow to dry well.
Application: Thoroughly clean and degrease. Sand and rinse the substrate. Then apply the 1st coat of Compass diluted by max. 30 %. Subsequent coats can be thinned up to 15%. After every 2nd coat, sand with 320-400 grit.
Number of coats: 5 - 6
Drying time at 15° C: 3 hours
Processing time at 15° C: min. 24 hours
Processing temperature: +5 °C to max. 35° C
Please note the following hazard warnings:
Klanten kopen ook
Customers ask customers
Your question will be automatically forwarded to other SVB customers and your question will be published on the product page. Please do not pose any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone at: +49 (0)421-57290-0 .