For coated surfaces:
Degrease surface with Thinner No. 1 and sand with 280-320 grit, clean and allow to dry.
For uncoated surfaces:
- Bare wood: Degrease thoroughly with Thinner No. 1. Sand smooth with 80-180 grade paper and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. Then apply wood treatment and allow to dry.
Application: Thoroughly clean and degrease. Sand and rinse the substrate. Then thin the 1st coat of Goldspar Satin by 10-15 % before applying. Then apply a minimum of 3 unthinned coats. After every 2nd coat, sand with 320-400 grit.
Number of coats: 3-4 coats
Drying time at 15° C: 3 hours
Processing time at 15° C: min. 15 hours
Processing temperature: +5 °C to max. 35° C
Please note the following hazard warnings:
Klanten kopen ook
Customers ask customers
Your question will be automatically forwarded to other SVB customers and your question will be published on the product page. Please do not pose any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: email@example.com or by phone at: +49 (0)421-57290-0 .