SVB recommends the following for this item
For coated surfaces:
Degrease surface with Super Cleaner and sand with 280-320 grit, clean and allow to dry.
For uncoated surfaces:
- Bare wood: Sand first with 80-180 grit then with 280 grit and remove dust. Then apply wood treatment and allow to dry.
Application: Thoroughly clean and degrease. Sand and rinse the substrate. Apply a total of 2-4 coats and sand with 320-400 grit after each coat.
For bare wood, apply the 1st coat of clear varnish diluted 10% with Thinner No. 1. Then apply 4-6 undiluted coats. After each coat, sand with 320-400 grit.
Drying time at 15° C: 2.5 hours
Processing time at 15° C: min. 14 hours
Processing temperature: +10 °C to max. 29° C
Please note the following hazard warnings:
Customers ask customers
Your question will be automatically forwarded to other SVB customers and your question will be published on the product page. Please do not pose any questions which can only be answered by the SVB team – such as the status of an order or product availability. You are also more than welcome to contact our SVB team by email at: firstname.lastname@example.org or by phone at: +49 (0)421-57290-0 .